VMEBus - Power Architecture
MPC8640 Quad Core Power Architecture
6U VME MPC8640 Dual Core Single Board Computer

6U VME MPC8640 Dual, dual Core SBC with an Embedded 6 port Layer 2 Gigabit Ethernet Switch and Open FPGA for demanding processing performance
Model TIC De6 VMEb

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

  • Based on the Freescale MPC8640 e600 processor
  • Single or dual processor versions of the board support up to 4 processing cores
  • Six Gigabit Ethernet ports
  • Up to 16GB of soldered SSD disk
  • Up to 4GB of DDR2-ECC memory
  • Dual PMC / XMC sites fir I/O extension
  • USB 2.0 controller provides 2 high speed ports
  • Two RS232 and two RS422 ports per processor
  • VME64x with 2eSST VMEbus protocol to maximize bandwidths
  • VITA 31.1 compatible via Gigabit Ethernet port
  • Available in standard, rugged and conduction cooled form factors
  • Rear I/O option via rear transition module
  • Board support packages for VxWorks, LSP for Linux
  • Support for VxWorks and Linux OS

Also available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for VME Application Development SBC bundle datasheet.

MPC8641D

Emerson 6U VME MPC8641 based SBC
Model MVME7100

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • System-on-chip Freescale MPC8641D with dual PowerPC® e600 processor cores, dual integrated memory controllers, DMA engine, PCI Express interface, Ethernet, and local I/O
    Four Gigabit Ethernet ports
  • Up to 2GB of DDR2 ECC memory, 128MB Nor flash and 4 or 8GB Nand flash
  • USB 2.0 controller for integrating cost-effective peripherals
  • 2eSST VMEbus protocol offering interoperability with products such as the MVME6100 and MVME3100 at higher bandwidths
  • Board support packages for VxWorks, LynxOS, and Linux
  • Dual 33/66/100MHz PMC-X sites for expansion via industry standard modules with support for processor PMCs
  • 8x PCI Express expansion connector for PMC-X and XMC expansion using Motorola XMCspan
  • MVME721A direct-connect rear transition module (RTM) for I/O routing through rear of compact VMEbus chassis
  • Support for VxWorks and Linux

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for VME Application Development SBC bundle datasheet.


6U VME MPC8641D based SBC with Embedded Layer 2 Gigabit Ethernet Switch
Model TIC-De6-VMEa

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • Based on the MPC8641D e600 processor available in dual or single core configurations at 1 or 1.5GHz
  • Four Gigabit Ethernet ports
  • Up to 8GB of soldered SSD with RAID 0/1 capability
  • 2 x DDRII banks with each up to 4GB
  • 1 x PMC/XMC slot with expansion boards for up to 4 additional slots
  • 2 x USB ports
  • 2 x RS323/422 ports and 4 x TTL ports
  • VME64x with 2eSST VMEbus protocol to maximize bandwidths
  • VITA31.1 compatibility via dual Gigabit Ethernet ports
  • Rear I/O options via rear transition module
  • Board support packages for VxWorks and Linux OS
  • Available in standard, rugged and conduction cooled form factors

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for VME Application Development SBC bundle datasheet.

MPC7448
MPC7448 VMEbus SBC

Conduction or Air Cooled MPC7448 VME64x VITA 31.1 Single Board Computer
Model 5800/5801

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • MPC7448 1.5 GHz microprocessor (1 GHz in CC) with :
    • L1 caches : 32KB Inst. and 32KB Data with parity
    • 1MB of L2 integrated cache with ECC
    • 512MB or 1 GB of SDRAM-DDR with ECC
    • 64MB or 128MB of soldered Mirror Flash
  • Up to 1 GB soldered Nand Flash
  • 256KB (128-bit wide access) of high speed SRAM
  • 32KB of FRAM (non-volatile memory)
  • PPC Real Time clock and four 32 bit-timers
  • Calendar clock with supercap backup
  • Temperature sensor and monitoring
  • VME64x with 2eSST (Tsi148)
  • Two PMC slots with VITA35 routing : one Pn4 (64 IO) on P2 rows A/C, one partial Pn4 on P0
  • Marvell DiscoveryTM III system controller:
  • Three Ethernet 10/100/1000TX ports with:
  • Support for Jumbo frames
  • Virtual Cable Tester on line
  • Two routed on rear P0 and one on the front panel
  • One serial interface for the front console port
  • One USB2 controller with a three ports internal hub
  • GPIO on P0
  • A four channels SATA controller with two ports on P0 and two ports available through an on-board planar connector
  • Support for VxWorks and Linux

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for VMEbus Application Development SBC bundle datasheet.

MPC7457

2eSST VMEbus MPC7457 PowerPC® single-board computer
Model MVME6100

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

This is the first Motorola VMEbus SBC designed with the Tundra Tsi148T VMEbus interface chip offering 2eSST VMEbus performance. The 2eSST (two edge source synchronous transfer) protocol causes the VMEbus to run at a practical bandwidth of 320MB/s in most cases, thereby giving the bus an 8x performance increase over VME64's 40MB/s transfer rate. The MVME6100 series provides more than just faster VMEbus transfer rates; it provides balanced performance from the processor, memory subsystem, local buses and I/O subsystems. The MVME6100 provides a high performance platform that allows customers to leverage their investment in their VME infrastructure.

  • 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus
  • 1.267 GHz  MPC7457 PowerPC® processor
  • 128-bit AltiVecT coprocessor for parallel processing, ideal for data-intensive applications
  • Up to 2GB of on-board DDR ECC memory and 128MB of Flash memory for demanding applications
  • Two 33/66/100 MHz PMC-X sites allow addition of industry-standard, application-specific modules
  • Dual Gigabit Ethernet interfaces for high performance networking
  • VxWorks and Linux  board support packages available

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for datasheet.

MPC7455

Emerson - 6U VMEbus 1GHz PowerPC SBC
Model MVME5500

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • MPC7455 processor at speeds of 1 GHz and beyond, ideal for data intensive applications
  • 256KB of on-chip L2 cache and 2MB of L3 cache
  • AltiVec coprocessor for high-performance computational applications
  • 40MB Flash memory (32MB soldered and 8MB in sockets)
  • Dual PCI buses and dual PMC sites with a bus speed of up to 66 MHz
  • One Gigabit Ethernet & One 10/100BaseTX Ethernet interface
  • Single VME slot even when configured with up to two mezzanine modules
  • Software supported: VxWorks and Linux

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for datasheet.
 

MPC7410 / MPC750

Emerson 6U VME 5100 Series PowerPC based SBC
Model MVME5110 (MPC7410) and MVME5100 (MPC750)

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • MPC7410 or MPC750 class microprocessor with 32KB/32KB L1 cache
  • Up to 2MB of secondary backside cache
  • 100 MHz front-side bus
  • Up to 512MB of on-board ECC SDRAM-expandable up to 1GB with optional RAM500 memory expansion modules
  • 17MB Flash memory
  • Dual IEEE P1386.1 compatible 32/64-bit PMC expansion slots
  • 64-bit PCI expansion mezzanine connector allowing up to four more PMCs
  • Dual 16550 compatible async serial ports
  • Dual 10BaseT/100BaseTX Ethernet
  • 32KB NVRAM and time-of-day clock with replaceable battery backup
  • Four 32-bit timers and one watchdog timer
  • On-board debug monitor
  • Single VME slot even when fully configured with two PMC modules and both add-on memory mezzanines
  • Commercial temperature versions available
  • Single Slot
  • Optional Transition Module for rear panel I/O
  • Support for VxWorks and Linux

Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for datasheet.

MPC755

Extended Temperature 6U VME 5106 PowerPC based SBC
Model TVME5106 / TVME5107

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • Operating temperature range -20°C to +71°C
  • 400MHz MPC755 class microprocessor with 32KB/32KB L1 cache
  • Up to 2MB of secondary backside cache
  • 100 MHz front-side bus
  • Up to 512MB of on-board ECC SDRAM-expandable up to 1GB with optional RAM500 memory expansion modules
  • 17MB Flash memory
  • Dual IEEE P1386.1 compatible 32/64-bit PMC expansion slots
  • 64-bit PCI expansion mezzanine connector allowing up to four more PMCs
  • Dual 16550 compatible async serial ports
  • Dual 10BaseT/100BaseTX Ethernet
  • 32KB NVRAM and time-of-day clock with replaceable battery backup
  • Four 32-bit timers and one watchdog timer
  • On-board debug monitor
  • Single VME slot even when fully configured with two PMC modules and both add-on memory mezzanines
  • Commercial temperature versions available
  • Single Slot
  • Optional Transition Module for rear panel I/O
  • MVME5106 supports booting a variety of operating systems:
    • Wind River Systems, VxWorks
    • Green Hills, Integrity
    • Multiple Partners, Linux
  • Now available as a bundle with operating systems, storage, and transition I/O.  See our AppliPak "Boot and Go" SBCs.  Click here for datasheet.
MPC8270
pLinesE-VMEb communications processor board MPC8270
High Performance Communications Processor Board
Model pLinesE-VMEb

  • Low cost PowerPC embedded core - 400MHz or 450MHZ

  • Supports 2eSST via Tundra TSi148 VME bridge for 320MB/sec transfer rate
  • SDRAM: 128 MB data size 64 bits with ECC checking

  • Flash Eprom: Up to 64 MB of Boot Flash with 16 bits Fast access; Compact Flash disk with true IDE mode

  • Four Asynchronous/Synchronous Serial ports

    • Customer specific communication functions can be implemented in the on-board FPGA
  • Four Asynchronous Serial ports
  • Independent security bus and watchdog

  • Hardware management of the communication transceiver

  • RS422 bus available on the front and on P2 connector

  • Three 10/100 auto-sensing Ethernet Ports
  • Available in standard and extended temperature
  • One PMC site (pLinesE4 only)
  • Miscellaneous:
    • Temperature monitoring
    • Time of day and calendar
    • Eight led user on front panel
  • Support for VxWorks and Linux

Ask about our Communications AppliPak based on the pLinesE-VMEb.

Download Datasheet

MPC8245 / 400 MHz

6U VME PowerPC e500 Single Board Computer
Model VME3100

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

 

  • Freescale MPC8540 System-on-Chip processor
  • 256MB/512MB DDR ECC SDRAM; 64MB/128MB of Flash memory
  • Dual Gigabit, one 10/100 Ethernet ports, USB 2.0 and SATA controllers
  • Tsi148 PCI-X bus to VMEbus bridge with 320MB/sec 2eSST VMEbus protocol
  • Dual PMC-X sites
  • Five serial ports, RTC, four tick timers, watchdog timer, and Rear Transition Module (RTM)
  • Board support packages for VxWorks and Linux

    • Download Datasheet