10/100 Fast Ethernet : Single/Dual/Quad
  • Meets PCI Mezzanine Card (PMC) IEEE 1386 specification
  • Full duplex operation in both 10/100 modes
  • Auto negotiation
  • Automatic configuration to highest possible speed
  • Device drivers available: VxWorks, LynxOS, SOlaris, Linux, and Windows
    Point-to-point links can be created without any external hardware: simple crossover cables create a direct high bandwidth serial connection. Connections support full duplex operation, providing an aggregate 20Mb/sec data highway. Note that when used in a point-to-point configuration, or using an Ethernet switch, there is no contention and thus provides deterministic operation.
    Device drivers are available for many common operating systems. They work with local protocol stacks ensuring plug-and-play integration to existing applications.
Single Ethernet Controllers

Single 10/100-TX Ethernet with Front & Rear I/O
Model 8150G

EOL - Contact Elma regarding replacement products.

RoHS compliant form, fit and function replacement for the Model

8150
  • 82551IT Ethernet controller provides full duplex operation at both speeds
  • Front I/O accessed via RJ-45 connector on front panel
  • Rear I/O provided through PN4 connector
  • Four front panel LED indicators for power, link, transmit/receive, and 100 Mbps operating modes
  • On board flash memory for on board BIOS for boot purposes
  • PMC Interface Module (PIM) compatible

    • Download Datasheet


Single 10/100-TX Ethernet with Rear I/O only
Model 8151

EOL - Contact Elma regarding replacement products.

  • i82559 Ethernet controller provides full duplex operation at both speeds
  • Rear I/O provided through PN4 connector
  • On board flash memory for on board BIOS for boot purposes
  • Four front panel LED indicators for power, link, transmit/receive, and 100 Mbps operating modes
  • PMC Interface Module (PIM) compatible
Dual Ethernet Controllers

Dual 10/100 BaseT Ethernet PMCx
Model 8158

EOL - Contact Elma regarding replacement products.

  • 64 bit 133 MHz PCI bus through a 31154 PCIx to PCIx bridge
  • Built around Intel 82551ER full duplex Ethernet controllers
  • Front and rear (PIM required) I/O
  • RJ45, CAT 5 unshielded twisted pair ports
  • Link, speed and activity LEDs per port

    Download Datasheet

Dual 10/100 BaseT Ethernet PMC
Model 8154G and 8156G

EOL - Contact Elma regarding replacement products.

RoHS compliant form, fit and function replacement for Models 8154 and 8156 series

  • 32 bit 66 MHz PCI bus through a PLX 6150B bridge
  • Built around Intel 82551ER full duplex Ethernet controllers
  • Front and rear (PIM required) I/O
  • RJ45, CAT 5 unshielded twisted pair ports
  • Link, speed and activity LEDs per port

    Download Datasheet

Dual 10/100 BaseT Ethernet
Model 8700-TX
  • RJ-45 for CAT 5 unshielded twisted pair (UTP)
  • 64 bit, 33 mHz Universal 3.3 & 5v PCI, 4W
  • LINK, SPEED, Activity LED indicators per port
  • Optional EN300 European Telco Surge protection

    • Download Datasheet

Quad Ethernet Controllers

Quad 10/100 Base T Ethernet PMCx
Model 8159

EOL - Contact Elma regarding replacement products.

  • 64 bit 133 MHz PCI bus through a 31154 PCIx to PCIx bridge
  • Built around Intel 82551ER full duplex Ethernet controllers
  • Front and rear (PIM required) I/O
  • RJ45, CAT 5 unshielded twisted pair ports
  • Link, speed and activity LEDs per port

    • Download Datasheet

Quad 10/100 Base T Ethernet PMC
Model 8155G and 8157G

EOL - Contact Elma regarding replacement products.

RoHS compliant form, fit and function replacement for Models 8155 and 8157

  • 32 bit 66 MHz PCI bus through a PLX 6150B bridge
  • Built around Intel 82551ER full duplex Ethernet controllers
  • Front and rear (PIM required) I/O
  • RJ45, CAT 5 unshielded twisted pair ports
  • Link, speed and activity LEDs per port

    • Download Datasheet

Quad 10/100Base T Ethernet
Model 8701-TX
  • RJ-45 for CAT 5 unshielded twisted pair (UTP)
  • 64 bit, 33 mHz Universal 3.3 & 5v PCI, 8W
  • LINK LED indicator per port

    • Download Datasheet