PMC I/O Digital
8046 FPGA Serial Controller PMC with Front or Rear IO
FPGA Serial Controller PMC Configurable with Front and Rear I/O
Model 8046
  • Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
  • Optional PIM8046 (VITA 36) for rear I/O connections 
  • Xilinx FPGA soft core PCI interface 
  • 16C550 compatible host interface 
  • Software configurable line interface per channel
  • UART16-configuration: Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface
  • UART24-configuration: 16 channel Rx and Tx RS232 interface, and 8 channel Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface 
  • FIFO depth 512 Bytes 
  • Baud rate RS232 up to 250kbps, for RS422/RS485 higher
  • RS485/RS422 true fail-safe receivers 
  • PCI interface: PCI 3.0 compliant, 33MHz, 32-bit interface, 3.3V signalling and 3.3V supply 
  • Dip switch selectable line termination 
  • Available in operating temperature ranges of  0 to 55°C and extended ranges of  -40° to +85°C
Download Datasheet

 

32-Channel Digital I/O with 30-ns Timestamp Counter
Model 8051
  • Provides 32-bits of bi-directional, parallel accessed I/O
  • Slave only PCI bridge
  • Time Stamp FIFO
  • Rear I/O accessed via 64-pin JN4 connector
  • Status LED indicators front panel

Download Datasheet

96-Channel Reconfigurable Digital I/O with 10K70
Model 8052
  • 32-bit PCI bus with PCI to Local Slave bridge
  • Altera Flex 10K FPGA
  • 32 I/Os accessible thru via 68-pin connector on front panel
  • 68 I/Os accessible via 64-pin rear connector

Download Datasheet

 

32-Channel Reconfigurable RS422/RS485 Digital I/O with 10K70
Model 8053
  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10K70 FPGA
  • For designs requiring differential interface
  • 32 RS422/RS485 I/Os
  • I/O accessible via front by 68-pin connector
  • I/O accessible via rear by 64-pin PN4 connector

Download Datasheet

32-Channel Reconfigurable RS422/RS485 Digital I/O with 10K70-2
Model 8054

EOL - Contact Elma regarding replacement products.

  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10K70-2 FPGA
  • For designs requiring differential interface
  • 32 RS422/RS485 I/Os
  • I/O accessible via front by 68-pin connector
  • I/O accessible via rear by 64-pin PN4 connector

Download Datasheet

80-Channel Reconfigurable Digital I/O
Model 8055
  • Enables designs requiring high speed single ended operation
  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10KE100 FPGA
  • 64 of 80 I/O lines accessible via rear Pn4 connector
  • All 80 I/O lines available via 80-pin front panel connector

Download Datasheet

Enhanced 32-channel Reconfigurable RS422/RS485 Digital I/O PMC
Model 8056
  • Provides 32 Channels of General-purpose
  • Digital I/O Second-generation enhanced Design
  • Supports 64 bit / 66 MHz PCI Bus
  • FPGA-based
  • Reprogrammable by Host or On-board Flash (EP1CS4)
  • Variable SRAM Architectures Allowed
  • Headers for JTAG Connection and FLASH Programming
  • Sample FPGA Implementation and Host "C" Code

Download Datasheet

Conduction Cooled 32-channel RS422/485 PMC
Conduction Cooled Enhanced 32-channel Reconfigurable RS422/RS485 Digital I/O PMC
Model 8056-CC
  • Conduction Cooled design
  • Provides 32 Channels of General-purpose Digital I/O
  • Supports 64 bit / 66 MHz PCI Bus
  • FPGA-based reprogrammable by Host or On-board Flash
  • Variable SRAM Architectures Allowed
  • Headers for JTAG Connection and FLASH Programming
  • Sample FPGA Implementation and Host "C" Code

Download Datasheet