Serial Controllers and Ports
Serial Controller
Serial Port Options:
3-Ports
Serial Controller
FPGA Serial Controller Card with Front and Rear I/O
Model 8046
  • Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
  • Optional PIM8046 (VITA 36) for rear I/O connections
  • Xilinx FPGA softcore PCI interface
  • 16C650 compatible host interface
  • PCI interface:
    • PCI 2.1 compliant
    • 33MHz, 32-bit interface
    • 3.3V and 5.0V signaling supported 5V supply
  • 8 serial RS422 channels with Rx, Tx, RTS and CTS at 68-pin front or 64-pin rear connector
  • Dipswitch selectable line termination

    • Download Datasheet

Serial: 2-Port
2-port RS232/422/485 Asynchronous Communications
Model 8005
  • Low cost I/O solution to provide additional ports for an SBC
  • Each port can be set up independently to RS232 or RS422 levels
  • RS422 provides option for data transmit/receive in RS485 mode
  • Provides two 16550-based UARTs up to 155K-baud
  • Ports are available via the front panel using DB-9 connector

    • Download Datasheet

Serial: 3-Ports
8075 Isolated 3-ports for RS232 RS422 and RS485 on a PMC
3-port RS232/422/485 Isolated Asynchronous Communications
Model 8075
  • Efficient I/O solution provides additional ports for an SBC
  • Provides three front panel async serial ports (16550 UARTs)
  • Each port configurable as RS232, RS422, or RS485
  • Independent isolation for each port
  • Micro D9 sub-miniature front panel connectors
  • Selectable PCI interrupt configuration
  • Optional cable assembly supports standard DB-9 interface
  • RoHS-compliant, lead-free

    • Download Datasheet

Serial: 4-Port
4-port RS232/422/485 Asynchronous Serial Communications
Model 8012
  • Provides sixteen 16550-based UARTs using RS422 or RS485 signaling
  • Each port provides two differential pairs of RS485 data
  • PLD between UART and RS485 permits variety of interfaces
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

4-port RS232/422/485 Asynchronous Serial Communications
Model 8012G
  • RoHS compliant version of 8012
  • Provides sixteen 16550-based UARTs using RS422 or RS485 signaling
  • Each port provides two differential pairs of RS485 data
  • PLD between UART and RS485 permits variety of interfaces
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

4-ports each RS232 & RS422 Asynchronous Communications
Model 8013
  • Provides eight 16550 UARTS with 4 ports RS232 and 4 ports RS422
  • RS232 ports provide full set of data for DTE operation
  • RS422 ports provide two differential inputs and two differential outputs
  • All 8 ports available through front panel via 68-pin SCSI connector
  • Rear I/O provided through PN4 connector via the J2 VMEbus connector

    • Download Datasheet

4-port Multi Function RS422/RS485 Digital I/O with 10K70
Model 8017
  • Multiple functions provided on a single card:
  • Two 16550-based UARTs, one RS422 and one RS485 provide:
    • Asynchronous communication at 115K baud
    • TXD, RXD, CTS, and RTS controls
  • 16 general purpose digital I/O lines based on Zilog 8536 chip
  • Temperature sensor
  • Front I/O accessed via 50-pin SCSI connector on front panel
  • Rear I/O provided through PN4 connector

    • Download Datasheet

Serial: 8-Port
8061 8-port RS232 Adapter
8-port RS232 Asynchronous Serial Communications RoHS compliant
Model 8010G
  • Provides eight 16550-based UARTs using RS232 signaling
  • UARTS operate at 300 baud to 115 Kbaud
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

8062 8-port RS422 Async Serial PMC RoHS
8-port RS422 Asynchronous Serial Communications RoHS compliant
Model 8016G
  • Provides eight 16550-based UARTs using RS422 signaling
  • UARTS operate at 300 baud to 115 Kbaud
  • Each port provides two differential inputs & outputs
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

Serial: 16-Port

16-port RS232 Asynchronous Serial Communications
Model 8011

EOL - Contact Elma regarding replacement products.

  • Provides sixteen 16550-based UARTs using RS232 signaling
  • UARTS operate at 300 baud to 115 Kbaud
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

16-port RS232 Serial Communications
Model 8038

EOL - Contact Elma regarding replacement products.

  • Provides sixteen 16550-based UARTs using RS232 signaling
  • UARTS operate at 300 baud to 115 Kbaud
  • Interrupt requests from each UART routed to 1 of 4 INTx on PCIbus
  • I/O accessed via 68-pin SCSI connector on front panel
  • Rear I/O provided by wiring all ports to the P4 connector

    • Download Datasheet

Serial: 24-Port
FPGA-based 16/24 channel serial communication controller card
Model 8047
  • Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
  • Optional PIM8047 (VITA 36) for rear I/O connections
  • Xilinx FPGA softcore PCI interface
  • 16C550 compatible host interface
  • Software configurable line interface per channel
  • UART16-configuration: Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface
  • UART24-configuration: 16 channel Rx and Tx RS232 interface, and 8 channel Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface
  • FIFO depth 512 Bytes
  • Baudrate RS232 up to 250kbps, for RS422/RS485 higher
  • RS485/RS422 true fail-safe receivers
  • PCI interface: PCI 2.1 compliant, 33MHz, 32-bit interface, 3.3V signalling and 3.3V supply
  • Dipswitch selectable line termination
  • Operating temperature of the 8047 is -40°.. +85°

    • Download Datasheet