Embedded Computing Solutions
The Elma Electronic Systems group includes Embedded Computing Products and Services,
formerly known as ACT/Technico. For all product groups, visit elma.com
Tel.: 215-956-1200 :: Toll free: 800-445-6194 ::
The Elma Electronic Systems group includes Embedded Computing Products and Services,
formerly known as ACT/Technico. For all product groups, visit elma.com
Tel.: 215-956-1200 :: Toll free: 800-445-6194 ::
Adapters/Carriers
Elma's line of adapters and carriers add versatility to any system design and help minimize form factor incompatibility. Add new functionality to any system with our selection of 3U VPX mezzanine carriers, cPCI mezzanine carriers or PMC to cPCI adapters. Custom designs are readily available and devices drivers available for VxWorks, LynxOS, Solaris, Linux, and Windows.
3U VPX to XMC Carrier for XMC Expansion
Model TIC-XMC-VPX3a
Model TIC-XMC-VPX3a
- Add functionality to your 3U VPX system with this 3U VPX form factor XMC carrier card
- Supports a wide range of mezzanine expansion modules
- Available in standard through rugged conduction cooled grades
- Up to full PCIex8 data plane bandwidth
- Expansion plane bandwidth up to 64 I/O lines
- Front panel LEDS for reset status, built in self test, system controller status and NVMRO status.
- Utility plane interface
Depending on the XMC board inserted, the TIC-XMCVPX3a is compatible
with the following OpenVPX
profiles (VITA 65) :
• MOD3-PAY-1D-16.2.6-n
• MOD3-PAY-2F-16.2.7-n
• MOD3-PAY-1F4U-16.2.8-n
• MOD3-PAY-8U-16.2.9-n
• MOD3-PER-2F-16.3.1-n
• MOD3-PER-1F-16.3.2-n
• MOD3-PER-1U-16.3.3-n
3U VPX to XMC/PMC Carrier for Mezzanine Expansion
Model VPX5310
Model VPX5310
- Add functionality to your 3U VPX system with this 3U VPX form factor XMC/XMC carrier card
- Supports a wide range of mezzanine expansion modules
- Available in standard through rugged conduction cooled grades
- Jumper selectable x4 Fat pipe or x8 Dual Fat pipe interface
- Conforms to VITA 46, 46.4 and 46.9. Optionally VITA 48
- Front or rear I/O support
- Up to full PCIex8 data plane bandwidth
- Expansion plane bandwidth up to 64 I/O lines
2eSST VMEbus Carrier for PrPMC and PMC Modules
Model 5000
Model 5000
- Provides a high performance VMEbus interface for two PMC/XMC slots with an increasing of 4x the usable bus bandwidth compared with existing solution
- Standards supported with the VMEbus interface :
- Backward compatible with legacy protocols to preserve the existing VME system
- VME64x extensions
- 2eVME and 2eSST protocols
- Full VMEbus system controller
- Interrupt and Interrupt handling capability
- PMC site one:
- PrPMC or PMC 32/64-bit with PCI 33/66MHz or PCI-X 50/100Mhz
- Compliant with IEEE1386.1
- XMC support via 8-bit parallel RapidIO to the second PMC slot
- VME interface via PCI-X 64-bit bus
- PMC site two:
- PMC 32-bit 33/66MHz or PCI-X up to 100Mhz
- Compliant with IEEE1386.1
- XMC support via RapidIO bus between the two PMCs
- Cyclone FPGA to implement easily specific or customer functions
- LED and Thermal sensor
- 6U-form factor for use in VME or stand-alone systems
PCI to PMC Adapter for Test
Model 8097 * EOL - Please refer to Model 8098 below *
Model 8097 * EOL - Please refer to Model 8098 below *
32/64bit, 33/66MHz PCI-X to PMC-X Adapter
Model 8098
Model 8098
- Permits operation of a standard 32 or 64 bit PCI-X card in a PMC slot
- Passive adapter - no software set up required
- Supports "PCI-X Capable" signal allowing use of legacy PCI boards or PCI-X boards
- LEDs monitor power supplies and key signals from the PCI bus
32/64b 33/66 MHz PCI-x to PMC-x Adapter
Model 8098a
Model 8098a
- Permits operation of a standard 32 or 64 bit PCI-X card in a PMC slot
- Passive adapter - no software set up required
- Supports "PCI-X Capable" signal allowing use of legacy PCI boards or PCI-X boards
- LEDs monitor power supplies and key signals from the PCI bus
- 10 Watt 5V to 3.3V DC to DC converter
PCMCIA to PMC Adapter
Model 8073
Model 8073
- Permits use of a Type I or Type II PCMCIA card in PMC slot
Cardbus/PCMCIA to PMC Adapter
Model 8059
Model 8059
- Permits use of Cardbus and PCMCIA cards in a PMC slot
PMC to 3U CompactPCI Carrier
Model 7000
Model 7000
- 3U CompactPCI Form Factor (100mm high x 160mm deep)
- Only one slot (3U x 4HP) required
- Passive Series Termination
- For use with 32-bit PMCs
- 64 User I/O lines routed to CPCI connector (models 7000-2 and 7000-4)
- 2 Status LEDs: IRQ Request from PMC and PMC Bus Master
- Accepts standard PMC I/O connector through the CPCI front panel
- P/N 7000-1: for use in 64-bit systems; no rear I/O; J1 only
- P/N 7000-2: for use in 32-bit systems; rear I/O; J2 connector
- P/N 7000-3: same as -1, mounted at bottom of 6U Front Panel
- P/N 7000-4: same as -2, mounted at bottom of 6U Front Panel
- Hot Swap version also available - contact sales
PMC to 6U CompactPCI Carrier
Model PMC-202
Model PMC-202
- 6U CompactPCI form factor requires only 1 slot (4 HP)
- Support for 2 single width modules or one dual width module
- 5 Volt or 3.3 Volt signaling
- 32/64-bit and 33/66 MHz PCI interface
- Supports non-Monarch Processor PMC modules
- I/O via front panel and rear via J3 and J4 or J3 and J5 to a Transition Module
- PMC rear I/O routed as differential pairs to support SCSI rear I/O
- Hot swap live insertion support per PICMG 2.1, Rev. 2.0
- PLX Technology PCI 6254 PCI to PCI bridge
- Front panel LED for PCI bus activity
- Extended temperature version also available (-20° C to +70°C)
- RoHS (leaded) and non-RoHS (unleaded) versions available